The `PointSignal`

class monitors a 3D coordinate.

Property | Description |
---|---|

`x` | (get) x: ScalarSignal Represents the X coordinate of the point. |

`y` | (get) y: ScalarSignal Represents the Y coordinate of the point. |

`z` | (get) z: ScalarSignal Represents the Z coordinate of the point. |

Method | Description |
---|---|

` abs ` | abs(): ScalarSignal Returns a signal with the value that is the absolute value of the given signal. See Also: `ReactiveModule.abs` |

` add ` | add(other: ScalarSignal): ScalarSignal Returns a signal with the value that is the sum of the values of the given signals. Note: `add` and `sum` functions are synonyms, the behavior they provide is equivalent.See Also: `ScalarSignal.sum` , `ReactiveModule.add` |

` atan2 ` | atan2(other: ScalarSignal): ScalarSignal Returns a signal with the value that is the angle in radians between the x-axis and the ray from (0, 0) to (x, y) where x and y are the values of the specified signals. The range is -PI to +PI. See Also: `ReactiveModule.atan2` |

` ceil ` | ceil(): ScalarSignal Returns a signal with the value that is the smallest integer that is greater than or equal to the value of the given signal. See Also: `ReactiveModule.ceil` |

` clamp ` | clamp(min: ScalarSignal, max: ScalarSignal): ScalarSignal Returns a signal with the value that is the value of the given `x` signal constrained to lie between the values of the given `min` and `max` signals.Note: The behavior is undefined if `min` is greater than `max` . |

` cross ` | cross(other: VectorSignal): VectorSignal Returns a vector signal with the value that is the cross product of the given signals. See Also: `VectorSignal.dot` , `ScalarSignal.mul` , `VectorSignal.mul` |

` delayBy ` | delayBy(timeSpan: {milliseconds: number}): this Delays a signal. The argument is an object with a "milliseconds" property specifying the delay duration in milliseconds. |

` distance ` | distance(other: PointSignal): ScalarSignal Returns the distance from the point to another point as a `ScalarSignal` . |

` div ` | div(other: ScalarSignal): ScalarSignal Returns a signal with the value that is the value of the first signal divided by the value of the second signal. See Also: `ReactiveModule.div` |

` dot ` | dot(other: VectorSignal): ScalarSignal Returns a scalar signal with the value that is the dot product of the given signals. See Also: `VectorSignal.cross` , `ScalarSignal.mul` , `VectorSignal.mul` |

` expSmooth ` | expSmooth(dampFactor: number): PointSignal Smoothes a variable signal using exponential averaging over time. The argument specifies the dampening time constant in milliseconds. Note: See also `ReactiveModule.expSmooth` . |

` floor ` | floor(): ScalarSignal Returns a signal with the value that is the largest integer that is less than or equal to the value of the given signal. See Also: `ReactiveModule.floor` |

` fromRange ` | fromRange(x: ScalarSignal, min: ScalarSignal, max: ScalarSignal): ScalarSignal Maps x from [min, max] range to [0.0, 1.0] range. |

` history ` | history(framesCount: number): PointSignalHistory Returns an object used to access signal values from past frames. The amount of frames tracked is customizable via `framesCount` parameter.Historical signal values are going to be initialized with signal value at call time or using `initialValues` if provided. |

` magnitude ` | magnitude(): ScalarSignal Returns the magnitude of the vector as a `ScalarSignal` . |

` magnitudeSquared ` | magnitudeSquared(): ScalarSignal Returns the squared length (magnitude) of a given signal. Calculating the squared magnitude instead of the magnitude is much faster. Often if you are comparing magnitudes of two vectors you can just compare their squared magnitudes. |

` max ` | max(other: ScalarSignal): ScalarSignal Returns a signal with the component-wise values that are the greater of the values of the given signals. |

` min ` | min(other: ScalarSignal): ScalarSignal Returns a signal with the component-wise values that are the lesser of the values of the given signals. |

` mix ` | mix(signal: ScalarSignal, factor: ScalarSignal): ScalarSignal Returns a signal with the value that is the linear interpolation between this and another `signal` by a given `factor` . |

` mod ` | mod(other: ScalarSignal): ScalarSignal Returns a signal with the value that is the floating-point remainder of the division of the value of the first signal by the value of the second signal. See Also: `ReactiveModule.mod` |

` mul ` | mul(other: ScalarSignal): ScalarSignal Returns a signal with the value that is the product of the values of the given signals. See Also: `ReactiveModule.mul` , `ScalarSignal.mul` , `VectorSignal.mul` |

` neg ` | neg(): ScalarSignal Returns a signal with the negated value of the given signal. See Also: `ReactiveModule.neg` , `ScalarSignal.neg` , `VectorSignal.neg` |

` normalize ` | normalize(): VectorSignal Returns the normalized (unit) vector in the direction of the original vector as a `VectorSignal` . |

` pow ` | pow(exponent: ScalarSignal): ScalarSignal Returns a signal with the value that is the base signal raised to the power of the exponent signal. The result is undefined if the base is negative, or if the base is zero and the exponent is not positive. See Also: `ReactiveModule.pow` |

` reflect ` | reflect(normal: VectorSignal): VectorSignal Calculates the reflection direction for an incident vector and a normal as a `VectorSignal` . |

` round ` | round(): ScalarSignal Returns a signal with the value that is the rounded value of the given signal. Note: When the fractional part is 0.5, it rounds the number away from zero, which is at odds with JavaScript standard behavior of rounding it always up in such cases. Therefore, this function is NOT exactly the reactive counterpart of the standard JavaScript `Math.round` utility.See Also: `ReactiveModule.round` |

` sign ` | sign(): ScalarSignal Returns a signal with the value that is the sign of the given signal. Possible sign values: NaN, -0.0, 0.0, -1.0, 1.0. Note: this function is the reactive counterpart of the standard JavaScript `Math.sign` utility.See Also: `ReactiveModule.sign` |

` smoothStep ` | smoothStep(x: ScalarSignal, edge0: ScalarSignal, edge1: ScalarSignal): ScalarSignal Returns 0.0 if x is less than edge0, and 1.0 if x is greater than edge1. If x is between edge0 and edge1, smooth Hermite interpolation is performed. |

` sqrt ` | sqrt(): ScalarSignal Returns a signal with the value that is the square root of the value of the given signal. See Also: `ReactiveModule.sqrt` |

` sub ` | sub(other: ScalarSignal): ScalarSignal Returns a signal with the value that is the difference of the values of the given signals. See Also: `ReactiveModule.sub` , `ScalarSignal.sub` , `VectorSignal.sub` , `PointSignal.sub` |

` sum ` | sum(other: ScalarSignal): ScalarSignal Returns a signal with the value that is the sum of the values of the given signals. Note: `add` and `sum` functions are synonyms, the behavior they provide is equivalent.See Also: `ScalarSignal.sum` , `ReactiveModule.add` |

` toRange ` | toRange(x: ScalarSignal, min: ScalarSignal, max: ScalarSignal): ScalarSignal Maps x from [0.0, 1.0] range to [min, max] range. |